Ultrasonic Cleaning!! In House - pics inside! - Page 2 - Houston-Imports.com

alf · 05-26-2010, 08:53 AM

i thought this was for teefs

91SEE-ARE-EX-Si · 07-21-2010, 07:52 PM

So, can a rim and tire fit? or just the rim? Because i have some dirt and grim on the inside rim that wont come off and i don't want to start throwing acids on it to get it off.

CChang · 07-22-2010, 07:08 AM

We can try it LOL

salviwill08 · 07-31-2010, 06:08 AM

i have a k20 block im about to swap into my car, its a complete short block how much to make it shiny! lol

CChang · 07-31-2010, 08:27 AM

Quote:

Originally Posted by salviwill08

i have a k20 block im about to swap into my car, its a complete short block how much to make it shiny! lol

It would not be wise to stick an entire assembled shortblock into the cleaner. Bare blocks are $50 to clean in our 2 stage process. First stage is solvent and second stage is ultrasonic.

JDM98Ferio · 08-12-2010, 10:12 AM

Price for bare Kseries head. Its decently clean just want it super fresh for assembly.

CChang · 08-12-2010, 12:23 PM

Quote:

Originally Posted by JDM98Ferio

Price for bare Kseries head. Its decently clean just want it super fresh for assembly.

Just bring it by...shouldn't be more than $40. I have soft spot in my heart for K-series stuff though so it may be cheaper

JDM98Ferio · 08-13-2010, 06:17 AM

Quote:

Originally Posted by CChang

Just bring it by...shouldn't be more than $40. I have soft spot in my heart for K-series stuff though so it may be cheaper

LOL cool!

Red88Si · 08-24-2010, 11:54 PM

Yo, would this clean gas tanks? I have an old motorcycle tank with some nasty coating that I want removed. Let me know if this is feasible!

CChang · 08-25-2010, 11:27 AM

Quote:

Originally Posted by Red88Si

Yo, would this clean gas tanks? I have an old motorcycle tank with some nasty coating that I want removed. Let me know if this is feasible!

It's feasible. Will it work? I don't know, but we can try.

bullfrogg0 · 09-11-2010, 02:14 AM

so if something gets brought by that hasn't been tested like the gas tank there and u'll "try" does that mean the customer still has to pay even if the process didn't work? i will be getting a 2j torn apart soon that's gonna get built for boost for my s13 and i was just wondering what it would cost to bathe the block, the head and the valve cover providing i disassemble everything first. quote?

CChang · 09-11-2010, 10:14 AM

To the first question, yes there will be a charge if a part goes into the cleaner.

As for the 2jz...block $75, head $50, valve cover $20 assuming everything is disassembled.

imainsight · 09-11-2010, 11:25 AM

do you guys also offer ultrasonic injector cleaning like these guys?

http://injectorrx.com/

CChang · 09-18-2010, 07:13 AM

Quote:

Originally Posted by mpmetro

do you guys also offer ultrasonic injector cleaning like these guys?

http://injectorrx.com/

While our equipment is capable of cleaning injectors with the same process as your reference, we do not have injector flow testing capabilites. Therefore, it would be in your best interest to secure services from a dedicated injector company such as Fuel Injector Clinic.

gcsd3742 · 11-11-2010, 04:46 PM

How about dunking my front left rim into the tank?

choi0706 · 05-10-2011, 11:06 AM

does it work for getting the white powdery stuff off of aluminum?

93egsr · 07-28-2011, 09:14 PM

does the size of the block matter? i have a bare B18 block. But it also has some rust around the bolts, will it clean rust off?..... and then will it clean the carbon build up off pistons? I mean what can and cant it clean?

CChang · 07-29-2011, 07:49 AM

We can fit up to 36"x24" in our cleaner. B18 block will fit no problem. It will take off some surface rust, but that is not it's purpose. It will clean carbon build up off pistons very well.

93egsr · 07-29-2011, 08:11 AM

can i get a pm on price per piston, block or a combo then?

CChang · 07-29-2011, 08:32 AM

PM['d

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

05-26-2010, 08:53 AM	#21
alf www.europeanag.com Join Date: May 2004 Location: The Gulfgate Posts: 24,923 Car: R	i thought this was for teefs

07-21-2010, 07:52 PM	#22
91SEE-ARE-EX-Si PryzTagOnYaHead XBL tag Join Date: Feb 2004 Location: Katy, Tegsas Posts: 7,122 Car: '10 MKVI VW GTI	So, can a rim and tire fit? or just the rim? Because i have some dirt and grim on the inside rim that wont come off and i don't want to start throwing acids on it to get it off.

07-22-2010, 07:08 AM	#23
CChang SSA Race Technologies Join Date: Apr 2003 Posts: 2,696 Car: M3, Tundra, RSX	We can try it LOL

07-31-2010, 06:08 AM	#24
salviwill08 yo daddy Join Date: Nov 2008 Location: Houston Tx Posts: 434 Car: truck	i have a k20 block im about to swap into my car, its a complete short block how much to make it shiny! lol

08-12-2010, 10:12 AM	#26
JDM98Ferio PSN= MANIAKBUILT Join Date: Feb 2003 Location: Compression,TX Posts: 2,076 Car: 95 K25 EG Racecar	Price for bare Kseries head. Its decently clean just want it super fresh for assembly.

08-24-2010, 11:54 PM	#29
Red88Si No Show No Go Join Date: Aug 2004 Location: Westchase Posts: 1,110 Car: Turbo Benz, v-twin café	Yo, would this clean gas tanks? I have an old motorcycle tank with some nasty coating that I want removed. Let me know if this is feasible!

09-11-2010, 02:14 AM	#31
bullfrogg0 n00b Join Date: May 2009 Posts: 11 Car: 2jz powered s13	so if something gets brought by that hasn't been tested like the gas tank there and u'll "try" does that mean the customer still has to pay even if the process didn't work? i will be getting a 2j torn apart soon that's gonna get built for boost for my s13 and i was just wondering what it would cost to bathe the block, the head and the valve cover providing i disassemble everything first. quote?

09-11-2010, 10:14 AM	#32
CChang SSA Race Technologies Join Date: Apr 2003 Posts: 2,696 Car: M3, Tundra, RSX	To the first question, yes there will be a charge if a part goes into the cleaner. As for the 2jz...block $75, head $50, valve cover $20 assuming everything is disassembled.

09-11-2010, 11:25 AM	#33
imainsight hello Join Date: Apr 2007 Location: here Posts: 652 Car: none	do you guys also offer ultrasonic injector cleaning like these guys? http://injectorrx.com/

11-11-2010, 04:46 PM	#35
gcsd3742 n00b Join Date: Feb 2006 Location: houston Posts: 183 Car: honda civic	How about dunking my front left rim into the tank?

05-10-2011, 11:06 AM	#36
choi0706 becoming a regular here! Join Date: Jan 2004 Location: Texas Posts: 2,935 Car: toasterbox	does it work for getting the white powdery stuff off of aluminum?

07-28-2011, 09:14 PM	#37
93egsr ughhhhhhh... Join Date: Jul 2011 Location: Houston Posts: 514 Car: 00 dakota	does the size of the block matter? i have a bare B18 block. But it also has some rust around the bolts, will it clean rust off?..... and then will it clean the carbon build up off pistons? I mean what can and cant it clean?

07-29-2011, 07:49 AM	#38
CChang SSA Race Technologies Join Date: Apr 2003 Posts: 2,696 Car: M3, Tundra, RSX	We can fit up to 36"x24" in our cleaner. B18 block will fit no problem. It will take off some surface rust, but that is not it's purpose. It will clean carbon build up off pistons very well.

07-29-2011, 08:11 AM	#39
93egsr ughhhhhhh... Join Date: Jul 2011 Location: Houston Posts: 514 Car: 00 dakota	can i get a pm on price per piston, block or a combo then?

07-29-2011, 08:32 AM	#40
CChang SSA Race Technologies Join Date: Apr 2003 Posts: 2,696 Car: M3, Tundra, RSX	PM['d