09 ZO6 w/ LG Motrsprts Sequential Trans!!

got-vtec? · 08-04-2009, 10:18 PM

http://videos.streetfire.net/video/L...tte_699516.htm

sry for link, but damn listen to that tranny! at first i was like..the fuh kinda super charger is that

lol

Aralliius · 08-05-2009, 07:52 AM

holy shit a 10.9 isnt that faster than a Z06 with a stock tranny and same mods?

**AWD** · 08-05-2009, 08:32 AM

Originally Posted by Aralliius

holy shit a 10.9 isnt that faster than a Z06 with a stock tranny and same mods?

Well, Ranger managed a 10.8@129 on drag radials only and nothing else. Then again, temps were in the 50's and DA was -850 unlike the 91 temps and 3600+ DA in the vid lol

at the guy launching at redline. I can only imagine what the vette would run in much better conditions. I want that tranny

uneek · 08-05-2009, 10:30 AM

how much is that tranny!!!???

**AWD** · 08-05-2009, 10:32 AM

Originally Posted by uneek

how much is that tranny!!!???

ay...$24,500...

http://www.lgmotorsports.com/catalog...oducts_id=2179

94c1v1cex · 08-05-2009, 10:35 AM

needs less tire... motor doesnt have enough mods its fuckin dead hookin off the line. he's launching aroun 6 or 7 grand and droppin that shit down to like 3

TXBlackout03 · 08-05-2009, 10:46 AM

Horrible launches... Sweet transmission though, love that sound

-RotorDemon- · 08-05-2009, 05:34 PM

Amazing the driveline and diff can handle that.

B18C1Swap · 08-05-2009, 06:29 PM

How does that tranny work? Do u still have to clutch or what?

-RotorDemon- · 08-05-2009, 06:50 PM

Originally Posted by B18C1Swap

How does that tranny work? Do u still have to clutch or what?

Yeah, just dump the clutch. The ratchet will convert fore and aft movements to a rotary motion that turns a barrel with tracks in it. Straight cut gears FTW!

91SEE-ARE-EX-Si · 08-05-2009, 06:52 PM

Originally Posted by TXBlackout03

Horrible launches... Sweet transmission though, love that sound

Yeah, straight up lemans tranny. All he need's is the Carbon Ceramic brake squeal.

B18C1Swap · 08-05-2009, 06:53 PM

Originally Posted by -RotorDemon-

Yeah, just dump the clutch. The ratchet will convert fore and aft movements to a rotary motion that turns a barrel with tracks in it. Straight cut gears FTW!

ahh got it

got-vtec? · 08-05-2009, 07:16 PM

i would just like to see a ZO6 with the same mods but with the stock tranny vs the ZO6 in the vid. just to see the difference

_lb · 08-06-2009, 11:32 AM

needs better driver. i thought he was going to break something with that launch

HomieG35 · 08-06-2009, 09:22 PM

Originally Posted by _lb

i thought he was going to break something with that launch

+1000000... Wasn't pretty.

00jdmcivic · 08-06-2009, 10:24 PM

i like that tranny

mr2slo4u · 08-07-2009, 09:38 AM

Originally Posted by AWD

Well, Ranger managed a 10.8@129 on drag radials only and nothing else. Then again, temps were in the 50's and DA was -850 unlike the 91 temps and 3600+ DA in the vid lol

at the guy launching at redline. I can only imagine what the vette would run in much better conditions. I want that tranny

+1 That ZO6 in the video was teh fail.

http://www.youtube.com/watch?v=469NvIOiz7U

**AWD** · 08-07-2009, 09:55 AM

Originally Posted by mr2slo4u

+1 That ZO6 in the video was teh fail.

http://www.youtube.com/watch?v=469NvIOiz7U

I woudlnt go that far.

You have to keep in mind the DA and temps. The Z w/ the tranny was in 91 degree weather and 3000+ DA. Ranger was in the low 50's w/ a DA of like...100 or something lol Big difference on how the cars will perform.

DA_LsVtAk · 08-07-2009, 10:35 AM

so driver mod isnt a factor?

st00pid · 08-07-2009, 04:25 PM

Needs to loosen the clutch a bit.. dead hookin and no clutch slip makes for a shitty ET.

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

08-04-2009, 10:18 PM	#1
got-vtec? Forum addict Join Date: Mar 2005 Posts: 1,171 Car:	http://videos.streetfire.net/video/L...tte_699516.htm sry for link, but damn listen to that tranny! at first i was like..the fuh kinda super charger is that lol

08-05-2009, 07:52 AM	#2
Aralliius Semper Fi Join Date: May 2007 Location: back in southern Cali Posts: 9,196 Car: 06 SpeedSix	holy shit a 10.9 isnt that faster than a Z06 with a stock tranny and same mods?

08-05-2009, 10:30 AM	#4
uneek Detailer & PC Tech Join Date: Dec 2007 Location: Cypress Posts: 737 Car: 08 Silverado	how much is that tranny!!!???

08-05-2009, 10:35 AM	#6
94c1v1cex SSA Grease Monkey Join Date: Sep 2007 Location: Houston Posts: 3,506 Car: 98 Camaro	needs less tire... motor doesnt have enough mods its fuckin dead hookin off the line. he's launching aroun 6 or 7 grand and droppin that shit down to like 3

08-05-2009, 10:46 AM	#7
TXBlackout03 becoming a regular here! Join Date: Nov 2004 Location: Kingwood, TX Posts: 4,887 Car: '04 Pontiac GTO	Horrible launches... Sweet transmission though, love that sound

08-05-2009, 05:34 PM	#8
-RotorDemon- Boosted Rotary Power Join Date: Aug 2004 Location: Portland, OR Posts: 913 Car: 1989 RX-7 GXL	Amazing the driveline and diff can handle that.

08-05-2009, 06:29 PM	#9
B18C1Swap Inline Racing Join Date: Jul 2008 Location: ... Posts: 2,766 Car: Turbo Integra	How does that tranny work? Do u still have to clutch or what?

08-05-2009, 07:16 PM	#13
got-vtec? Forum addict Join Date: Mar 2005 Posts: 1,171 Car:	i would just like to see a ZO6 with the same mods but with the stock tranny vs the ZO6 in the vid. just to see the difference

08-06-2009, 11:32 AM	#14
_lb MuLLet Join Date: Apr 2009 Location: Houston,Texas Posts: 737 Car:	needs better driver. i thought he was going to break something with that launch

08-06-2009, 10:24 PM	#16
00jdmcivic poor man's boost Join Date: May 2006 Location: k20a.org Posts: 5,461 Car: K twizzle	i like that tranny

08-07-2009, 10:35 AM	#19
DA_LsVtAk 500whp club Join Date: Sep 2004 Location: S.S.A pron director Posts: 12,685 Car: Turbo FA5/370z Blog Entries: 1	so driver mod isnt a factor?

08-07-2009, 04:25 PM	#20
st00pid DOUBLE AUGHT Join Date: Jan 2003 Location: Houston,TX Posts: 3,882 Car:	Needs to loosen the clutch a bit.. dead hookin and no clutch slip makes for a shitty ET.

Welcome to Houston-Imports.com