PDA

View Full Version : Bent Suspension


DJCharlie
12-02-2009, 08:43 PM
I have a 2000 civic which i ran into a curb pretty hard. The wheel is definitely pushed back an inch or two. Just wondering what is the cause for the wheel being pushed back. I was thinking lower control arm but can't tell if its bent or not. Any ideas? Just wondering what are the most common parts that get messed up in this kind of accident.

JDM MUSCLE
12-02-2009, 08:47 PM
lower control arm

DJCharlie
12-02-2009, 08:51 PM
So the upper control arm should be fine or should i replace that too?

JDM MUSCLE
12-03-2009, 06:29 AM
just replace the lower and put the tire back to make sure is str8 u might need aligment but thats all

yellow_si
12-03-2009, 08:22 PM
^^^^ what he said it happened to me

JLS Inc.
12-05-2009, 02:58 AM
common problem is lower control arm.

severe case would be the lower control arm and subframe.

SyntaxEscobar
12-05-2009, 08:24 AM
your axle might be bad as well. happened a couple times before x)

mojo_jojo77777
12-06-2009, 09:51 PM
lower control arm