PDA

View Full Version : ***Custom Novelty License Plates! - starting at $20.00***


glilly
02-25-2009, 12:03 PM
Custom License Plates!!

We've been running this special for almost four years now, ...due to price increases on materials, the plates are now starting at $20.00.

Good news is we have a lot more to choose from!!

We now offer THREE options for your "type" of plate.

(1) Standard Die Cut: Just like it's always been, ...die cut vinyl over a white (or black) metal plate. (these plates are made same day, while you wait)

(2) Reflective Die Cut: Our new option, ...die cut vinyl over a thick reflective metal plate. (these plates are made same day, while you wait)

(3) Reflective Print: Our "premium" option, ...digital printed vinyl over a metal blank w/ UV lamination, ...looks just like the real thing. (these plates require a next day pick up)

Since the introduction on "Myplates.com", we've had many requests for replica plates. While the replica plate may look 100% authentic, I can assure you they are not. ALL NOVELTY PLATES ARE FOR OFF ROAD AND SHOW USE ONLY. What you do with them when you leave my shop is at YOUR risk and YOU (the buyer) assume all responsibility.

We now offer a wide selection of novelty plates, with a wide array of options from the simple $20 special for a single color die cut plate to the $60.00 real carbon fiber plate with reflective lettering.

Pricing is as follows:

http://www.undergroundgrfx.com/img/noveltyprices.jpg

(shipping is $7.50 more)


http://www.undergroundgrfx.com/img/noveltyplates.jpg


"EURO Plates" are also available at $35 each, ...4.5" x 20.5" x .063 heavy grade aluminum

Carbon Fiber Plates (double sided blanks) still in stock as well for $50.

6" x 12" is the standard size.

How to order:
1. Paypal - glilly@swbell.net ...be sure to include what it is your ordering, what color(s), how many, and your current shipping address
2. Pick-up at Underground Graphics (...and save on shipping!!)
3. Pay by credit card by phone (Visa/MC only) $20.00 minimum.

Greg Lilly
Underground Graphics
8616 Daffodil, Suite B
Houston, TX 77063
713-783-4739

steven silver h22
02-26-2009, 03:29 PM
hey Greg i want to get the same one like you did for AlleyKat but can you fit

Steven's Silver H22 on it????

glilly
02-26-2009, 08:08 PM
hey Greg i want to get the same one like you did for AlleyKat but can you fit

Steven's Silver H22 on it????

ummmm, I could but it would look retarded with the letters so condensed.

If you want that many letters, we could do it in two, or even three lines of copy.

Greg

steven silver h22
02-26-2009, 08:55 PM
ummmm, I could but it would look retarded with the letters so condensed.

If you want that many letters, we could do it in two, or even three lines of copy.

Greg

yea thats what i thought, the two or even three lines sounds good! Im going to stop by on tuesday so i could show you what im talking about!

thanks man!

dropped90accord
02-27-2009, 04:09 AM
Very intrested could you do 1 like the 1 you did for alley cat but need it to say " 74 bagged bug" but don't want it to look cramped... any ideas? Thanks

glilly
02-27-2009, 07:47 AM
Very intrested could you do 1 like the 1 you did for alley cat but need it to say " 74 bagged bug" but don't want it to look cramped... any ideas? Thanks

You people are killing me! ...have you ever seen a Texas plate with 11 letters on it? :facepalm: again, I could do it, but it will look wrong because of the letters being so condensed.

If you want a lot of letters, i'd suggest another style plate, ...maybe graffiti letters, of somehting that does not follow a known 6-8 letter style plate like the TX DOT plates.

Greg :thumb:

AznJoe
02-27-2009, 08:21 AM
LOL

v.a.w.owner
02-27-2009, 11:16 AM
ummmm, I could but it would look retarded with the letters so condensed.

If you want that many letters, we could do it in two, or even three lines of copy.

Greg

if its on the car , i guess , and this is only my opinion......but,,,,,,,,

wouldnt they know it was silver? , or that its a bug? just lay down whats not known on the plate?

i would love a euro plate that says thumper on it for my rabbit gti

dropped90accord
02-27-2009, 01:27 PM
Yea I was thinking it would be to cramper well how bout "bagd bug" thanks for all your help.. also how long does it take to be made... I may jus have you mail it to me...

glilly
02-27-2009, 02:14 PM
if its on the car , i guess , and this is only my opinion......but,,,,,,,,

wouldnt they know it was silver? , or that its a bug? just lay down whats not known on the plate?

i would love a euro plate that says thumper on it for my rabbit gti


We have Euro plates too!!! :thumb:

dropped90accord
02-27-2009, 04:12 PM
Cost for euro plate? Also how many letters can I fit on the euro plate thanks...sorry for all the questions...

catharsis
02-27-2009, 06:17 PM
LOL

this pretty much sums up a lot of the inquiries in this thread. the thought "ARE YOU SERIOUS?" comes to mind right about now :hsugh:

90-RED-SI
02-27-2009, 09:44 PM
got mine today.... thanks

khanhdom
03-01-2009, 10:16 AM
do you have japanese plates?

glilly
03-01-2009, 12:20 PM
Cost for euro plate? Also how many letters can I fit on the euro plate thanks...sorry for all the questions...

$20 for the Euro plates, I think we still have a few templates in stock. They are 4.5" x 20.5" and made of thick .063 aluminum, so you can fit 8-10 ltrs with no problems.

do you have japanese plates?

We just use the same 6x12 as the standard plates, ...I've done a couple "JDM styled" plates, i'l have to dig up the design and see if it's what your looking for.

...would fall under the $10 special too!

APhap2
03-01-2009, 01:49 PM
Hey Greg, I want the same one that you did for Alley-kat but mines says "APhap2". How long does it takes to make em? I need 2 plates.:)

khanhdom
03-01-2009, 02:49 PM
We just use the same 6x12 as the standard plates, ...I've done a couple "JDM styled" plates, i'l have to dig up the design and see if it's what your looking for.

...would fall under the $10 special too!

I see, ok if you can get something like this

http://us.st12.yimg.com/us.st.yimg.com/I/autogeek_2040_25745523

the top where it says 07 if you can do RE

and below say NOBLESSE

and I would like 2 :)

glilly
03-02-2009, 10:38 AM
Hey Greg, I want the same one that you did for Alley-kat but mines says "APhap2". How long does it takes to make em? I need 2 plates.:)

takes like 10 minutes.

khanhdom
03-02-2009, 03:46 PM
well whenever you can do mine, let me know and I'll paypal you!

glilly
03-02-2009, 05:36 PM
well whenever you can do mine, let me know and I'll paypal you!

won't take but 10-15 minutes. Just come by and pay when you pick it up, ...unless you want it shipped, then add $3.00 to the paypal.

Greg :thumb:

APhap2
03-02-2009, 07:35 PM
takes like 10 minutes.

Sweet, man it sucks that you don't open on saturday's? :p I'll try to make it out tommrow or wednesday.:) thanks

steven silver h22
03-03-2009, 03:12 PM
Thanks Greg, the plates look great!:thumb:

penguinfreak
03-03-2009, 08:05 PM
Can you make a euro plate for an audi tt?

I want it to read "Arian Jafari" if possible.

And also, where are you located at?

khanhdom
03-03-2009, 10:25 PM
sent payment through paypal :thumb:

AzNVi3t2007
03-03-2009, 10:32 PM
This is greatness..!

glilly
03-04-2009, 08:37 AM
Can you make a euro plate for an audi tt?

I want it to read "Arian Jafari" if possible.

And also, where are you located at?

Underground Graphics
8616 Daffodil, Suite B
Houston, TX 77063
713-783-4739

...and yes, we can do that.

sent payment through paypal :thumb:

Got it!!

penguinfreak
03-04-2009, 03:00 PM
Alright cool, ill try to stop by friday.

And my front license plate is equipped with the frame for a regular license plate.
How would I go about mounting a euro plate on there when that is already on there?

dropped90accord
03-04-2009, 05:28 PM
Just got my euro plate and I'm very happy with it...will buy from again

glassJAW
03-05-2009, 08:26 AM
if we come in to get it made,is possible to get it that day? just asking

edit:nevermind i read the previous post, asking the same thing

glilly
03-05-2009, 10:04 AM
Alright cool, ill try to stop by friday.

And my front license plate is equipped with the frame for a regular license plate.
How would I go about mounting a euro plate on there when that is already on there?

you will need to drill your own holes, ...so just drill where the stock ones are. :thumb:

glassJAW
03-05-2009, 11:04 AM
thanks for getting mine done so fast this morning:thumb: came out great. i'll be back next week to get one more made since i didnt have enough moneyz this morning

glilly
03-05-2009, 11:36 AM
thanks for getting mine done so fast this morning:thumb: came out great. i'll be back next week to get one more made since i didnt have enough moneyz this morning

thank you!!

http://www.undergroundgrfx.com/img/glassjaw.jpg

APhap2
03-05-2009, 06:29 PM
thanks for the plates! love em!!!

danyo492
03-06-2009, 12:58 PM
picked up a plate and a panda sticker for my friend's present today :)
thanks greg, awesome job as usual!

91SEE-ARE-EX-Si
03-06-2009, 01:44 PM
can you do one like this? "Im a retard and i want fifty letters on this plate"....just like that? Can you make it fit? :facepalm:

khanhdom
03-07-2009, 12:17 PM
got my jap plates...looks great!

http://i42.tinypic.com/4hzlf5.gif

BlackCL
03-07-2009, 02:24 PM
I already have a custom plate that says "ITS HIM".. if i bring you that plate can you put the texas star in the middle?

glilly
03-09-2009, 08:33 AM
I already have a custom plate that says "ITS HIM".. if i bring you that plate can you put the texas star in the middle?

sure, as long as there is room for it.

wargoddamn
03-23-2009, 12:44 PM
Can i just go there in person and buy it instead of using pay pal?

glilly
03-23-2009, 03:31 PM
Can i just go there in person and buy it instead of using pay pal?

Yes.

5plusjuan
03-23-2009, 03:43 PM
greg,can you do some texas 16niss plates?

thanks,
juan

glilly
03-24-2009, 01:26 AM
greg,can you do some texas 16niss plates?

thanks,
juan

uh, yeah. :rock:

KeiichiLe
03-24-2009, 11:51 AM
I'll be seeing you soon. Mine got lawn mowed by the yard-xicans.

timtem
03-26-2009, 08:51 AM
got mine yesterday. thanks greg :thumb:

PHNTM3
04-13-2009, 01:00 AM
i need to find the vector file for my team logo...

EddieM08
04-18-2009, 09:25 AM
You still doing the special?

Cody_Rules
07-17-2009, 10:26 AM
any plates left?

HondaBoy84
07-17-2009, 02:59 PM
any plates left?

glilly
07-17-2009, 03:22 PM
plenty of plates left!!!

...and if there wasn't we'd get more. :thumb:

swyyyguy
07-23-2009, 08:17 AM
if it just takes 10 minutes, could i stop by your shop and order it then? i'm only asking because if i order it from you through here, i'm not sure how soon i can go pick it up seeing as how i don't live that close to your shop so i'd hate for you to make it for me and then have it sit there for days waiting for me to pick it up. :)

glilly
07-23-2009, 11:22 AM
if it just takes 10 minutes, could i stop by your shop and order it then? i'm only asking because if i order it from you through here, i'm not sure how soon i can go pick it up seeing as how i don't live that close to your shop so i'd hate for you to make it for me and then have it sit there for days waiting for me to pick it up. :)


that would be fine or, I can make it and ship it for $13.00

Greg :thumb:

AlleyKat
08-04-2009, 03:28 PM
http://www.undergroundgrfx.com/img/alleykatplate.jpg



:2cooleek:

ThaJokaa
08-08-2009, 01:09 PM
is there a way to see it bfore it gets made? to see if it looks right?

and also have the actual texas plate background? like wut u see on cars everyday?

AzNVi3t2007
08-08-2009, 08:48 PM
Im gonna get a plate(s). Will PM.

ThaJokaa
08-23-2009, 09:43 PM
is there a way to see it bfore it gets made? to see if it looks right?

and also have the actual texas plate background? like wut u see on cars everyday?

glilly
08-24-2009, 09:21 AM
you can come in the store to see the actual plate.

I can send you a proof of what it will look like, ...however, shouldn;t be that hard to figure out, ...it will look like the others posted here but with your "custom" letters.

If you're still unsure what it will look like I can spend an extra few minutes and send you a proof via email. It's just kinda a waste of time, ...unless you're having it shipped. I can make this for you in 5 minutes while you wait at the store.

As far as it having the "Texas" look to it? ...isn't that what I did here?

Greg :thumb:

ThaJokaa
08-24-2009, 10:18 AM
I ment like have the space shuttle on top and cowboy on the bottom with the blue around it.... not just all white

glilly
08-24-2009, 06:56 PM
I ment like have the space shuttle on top and cowboy on the bottom with the blue around it.... not just all white

but then it wouldn't be "custom". TX "personalized" plates have no background, ...only the standard issued ones.

ThaJokaa
08-24-2009, 08:25 PM
but then it wouldn't be "custom". TX "personalized" plates have no background, ...only the standard issued ones.

well ive seen some custom ones like that....

but can u make it? thats wut im askin?

glilly
08-25-2009, 03:11 PM
well ive seen some custom ones like that....

but can u make it? thats wut im askin?

Yes. But it would have to be printed. Plate, artwork and vinyl would be $35.00.

ThaJokaa
08-26-2009, 08:06 AM
Ok, can u make a sample 1st by comp to see wut itll look like?

glilly
08-26-2009, 12:46 PM
Ok, can u make a sample 1st by comp to see wut itll look like?

part of that fee is my time to design it. Would you like to put down a deposit that would be applied towards your plate?

come to think of it, TX has a new plate, ...want that faggy one or the old not so faggy one. :facepalm:

...man I can do whatever you want, just don't want to waste time on the artwork when you realize it's not right for you.

what do you want the plate to say anyway??

AzNVi3t2007
08-26-2009, 12:48 PM
:rofl:

I rikes me plates!. Thanks again

pinoyboy88
08-27-2009, 12:40 PM
is the special still goin on?

its_errick
08-27-2009, 05:46 PM
is the special still goin on?

should be.

greg me and my buddy might hit you up this saturday for one and some decals if your in.

XSV
08-28-2009, 12:28 AM
part of that fee is my time to design it. Would you like to put down a deposit that would be applied towards your plate?

come to think of it, TX has a new plate, ...want that faggy one or the old not so faggy one. :facepalm:

...man I can do whatever you want, just don't want to waste time on the artwork when you realize it's not right for you.

what do you want the plate to say anyway??

:rofl:

can you make one that says "FIJI" or does it have to have 7 letters? or maybe "UH FIJI"

glilly
08-30-2009, 03:28 PM
is the special still goin on?

:rofl:

can you make one that says "FIJI" or does it have to have 7 letters? or maybe "UH FIJI"


Special goes on until i'm out of white plates, ...and that's a long way away.

I can put whatever you want on it. ..if it's over 8 letters it starts to look too condensed though.

XSV
08-30-2009, 09:50 PM
Special goes on until i'm out of white plates, ...and that's a long way away.

I can put whatever you want on it. ..if it's over 8 letters it starts to look too condensed though.

oh, ok. cool i'll stop by soon to get one made

k2Oeg6
09-05-2009, 04:34 PM
time to think of what to put on plates =]. just curious whats teh turn around time?

glilly
09-08-2009, 11:14 AM
time to think of what to put on plates =]. just curious whats teh turn around time?

5 minutes?

dropt_accord
09-09-2009, 04:02 PM
picked mine up today!! thanks greg!

dc52k5
09-16-2009, 02:45 PM
ill come in friday ! i might get the euro plate depending on how it looks !! im trying to put "EXCUZE M3"

kaytoos
09-17-2009, 11:46 AM
Thanks!

http://i24.photobucket.com/albums/c39/h0odrich/IMG00081-20090916-2010.jpg

gela0708
10-07-2009, 09:40 PM
lol how long do you think I could get away with using this instead of a real plate?

glilly
10-08-2009, 11:12 AM
try it and let me know!! :Ohnoez:

atxsbigwalt
10-09-2009, 11:50 AM
just wondering, any of ya'll who bought it; did yall put these on your actual vehicles or are you just using it for shows and decoration.

glilly
10-09-2009, 01:26 PM
just wondering, any of ya'll who bought it; did yall put these on your actual vehicles or are you just using it for shows and decoration.

it's jus fo decoration! /bubb rubb :lol:

gela0708
10-09-2009, 02:55 PM
I'll run with it as a plate till I get my real plates :D

glilly
10-10-2009, 11:27 AM
I'll run with it as a plate till I get my real plates :D

GL, lmk, how that turns out for ya.

king_of_HTX
10-12-2009, 08:57 PM
Can you do Louisiana plates?

gela0708
10-13-2009, 09:25 AM
It's vinyl on top of the alluminum frame so I'm sure he can do any state, any letters anything just let him know! Great work imo.

Btw I've been rolling with the plates on the car for a week now no issues lmao. Cop even flagged me over to ask me how to go about getting custom plates and I told him through the DMV and he said alright cool, looks good, lmao..

trang_man
10-20-2009, 08:50 AM
Can you put Trang Man on the lonestar plate?
If anything, I'll stop by tomorrow to pick it up.

glilly
10-20-2009, 11:31 AM
Can you put Trang Man on the lonestar plate?
If anything, I'll stop by tomorrow to pick it up.

of course. :thumb:

trang_man
10-23-2009, 07:51 AM
Thanks! Awesome work!

18sorbetter
10-27-2009, 09:50 PM
I'm just wondering if it is possible to get the plate in black? Would a special order have to made for that?

Thanks

glilly
10-28-2009, 09:40 AM
I'm just wondering if it is possible to get the plate in black? Would a special order have to made for that?

Thanks

I have black plates, but they are not part of the $10 special, ...the black plates would be $15 with design :thumb:

gela0708
10-30-2009, 08:21 AM
still been using mine as the real plate, no issues, no pull overs.

zero1types
11-09-2009, 10:17 PM
would it be possible to get a custom motorcycle size license plate done? lmk id like to get 1 mini plate an 2 for the lude. might order sometime this week.

glilly
11-11-2009, 11:13 AM
would it be possible to get a custom motorcycle size license plate done? lmk id like to get 1 mini plate an 2 for the lude. might order sometime this week.

unfortunately, no. the blanks in stock are only for the cars. I can do them, but it would be a special order, ...probably like $25 or so.

zero1types
11-26-2009, 11:58 PM
you open black friday lmk pm sent

glilly
11-30-2009, 09:05 AM
a customer asked about the "euro plates", ....while we do offer them, they are not "exact" replicas, but very close. They are also $25 each.

sample:
http://www.undergroundgrfx.com/img/europlate.jpg

4.5" x 20.5"

motor head
12-06-2009, 05:35 PM
got my jap plates...looks great!

http://i42.tinypic.com/4hzlf5.gif

want jap plates like in the picture but to say DSM GIRL
lmk if yall still have some

glilly
12-07-2009, 09:18 AM
want jap plates like in the picture but to say DSM GIRL
lmk if yall still have some

no problem, we can do that. Still $10. :thumb:

hardagecustoms
12-29-2009, 03:00 PM
just got mine and they look amazing

mc4230
12-30-2009, 06:27 AM
payment sent for 3 + shipping, thanks

glilly
12-30-2009, 10:20 AM
payment sent for 3 + shipping, thanks

Sending out today!! :thumb:

HondaBoy84
12-31-2009, 01:51 PM
can u make one that says RDNONAIR

glilly
12-31-2009, 02:11 PM
can u make one that says RDNONAIR

Yes i can. :thumb:

albuttz
12-31-2009, 03:48 PM
wat time do ya usually close? imma swing by to get one made that says albuttz

w204driver
12-31-2009, 03:55 PM
make it say nikkabuttz

haris300
01-05-2010, 02:38 AM
was looking for something to use at car shows that says FAIRLADY Z on the front. doesn't really have to look like a state license plate.

was wondering if you could do a black plate with FAIRLADY Z written in silver or red. anything similar works, just want something clean for showing off you know :2cooleek:

albuttz
01-06-2010, 03:25 PM
make it say nikkabuttz

lol that wrks too

glilly
01-08-2010, 08:08 AM
was looking for something to use at car shows that says FAIRLADY Z on the front. doesn't really have to look like a state license plate.

was wondering if you could do a black plate with FAIRLADY Z written in silver or red. anything similar works, just want something clean for showing off you know :2cooleek:

Not a problem, we also offer black blanks, and carbon fiber as well. Just call us for a qoute on your color(s)

Frankie_JDM
01-29-2010, 08:42 PM
I want one with my screen name on it FRANKIE_JDM

glilly
02-04-2010, 01:05 PM
I want one with my screen name on it FRANKIE_JDM


OK!!!

come in and order for $10, ..or I can ship it for $15 and pay by CC or Paypal.

180sxjuice
05-20-2010, 02:16 AM
do u still do these? how much for it to say s13_juice on it

SPECTRE
05-20-2010, 07:08 AM
I want one with my screen name on it FRANKIE_JDM

JESUS MAN,,, THATS ALOT OF LETTERS, LEMME GUESS YOU WANT THAT UNDERSCORE ALSO... :rofl:

glilly
05-20-2010, 11:26 AM
do u still do these? how much for it to say s13_juice on it

oh, "s13_ juice" would be a lot more than the $10 i've been charging everyone else for the last 2 years.






$10.00 :facepalm:

180sxjuice
05-20-2010, 08:50 PM
awesome ill pick one up tomorrow

180sxjuice
05-22-2010, 12:20 AM
awesomeness, thanks
http://i61.photobucket.com/albums/h65/juicyjregulate/photo-7.jpg

glilly
05-25-2010, 05:06 PM
awesomeness, thanks
http://i61.photobucket.com/albums/h65/juicyjregulate/photo-7.jpg

looks good!! :thumb:

swyyyguy
06-12-2010, 11:11 AM
thanks greg!

http://hosting11.imagecross.com/image-hosting-38/866swyguy_plate.jpg

swyyyguy
06-12-2010, 08:55 PM
thanks greg!

http://hosting11.imagecross.com/image-hosting-38/866swyguy_plate.jpg
having trouble finding a good host for the pic. i'll post it later.

djuzi05
10-02-2010, 12:19 PM
Hey, just giving you a heads up that I sent payment for a plate under uhasib@gmail.com. If you have any questions, let me know :thumb:

MachOne
10-11-2010, 09:28 PM
do u do bike plates? its smaller size

glilly
10-19-2010, 01:12 PM
do u do bike plates? its smaller size

not in alunimum, ...only in plastic.

MachOne
10-25-2010, 03:43 PM
that's fine. same price?

OniLink
11-25-2010, 11:03 AM
PMed

StatusKuo
01-22-2011, 07:14 PM
are the cf plates the same price as the white ones?

Vtak16
01-22-2011, 07:35 PM
I think I want a plate that says Vtak16.

winggiang90
01-24-2011, 09:21 AM
are the cf plates the same price as the white ones?

+1

glilly
01-24-2011, 03:00 PM
the carbon fiber plates are $40 ea.

The plate special has been a huge success, therefore it is a permanent fixture of Underground Graphics and now includes white or black plates, as well as several of the new Texas plate designs.

Inquire within.


....please note, while many are using thee for everyday use, they ARE NOT REAL PLATES and are for show and off-road use only. What you do with them when you leave my shop is up to you, but I accept NO responsibility if you get arrested for using them illegally.

...we also offer them on white reflective at an extra price. :2cooleek:

StatusKuo
01-26-2011, 09:04 PM
idk if this is a stupid question or not but if we get our actual plate numbers on your custom plate, we should be able to put it on without getting pulled over right? if thats the case, im interested in a carbon fiber one.

hardagecustoms
01-27-2011, 09:17 AM
idk if this is a stupid question or not but if we get our actual plate numbers on your custom plate, we should be able to put it on without getting pulled over right? if thats the case, im interested in a carbon fiber one.

:facepalm:

RurouniMidnight
01-30-2011, 02:07 PM
Sent money through paypal last night.

haris300
02-03-2011, 12:38 AM
money and PM sent!

racerblack19
02-12-2011, 06:23 PM
Process is pretty quick Only took him 15 mins! Thanks greg, I forgot to return your screwdriver will bring it back monday lol

http://i18.photobucket.com/albums/b102/Donalddrift18/IMG_20110210_160159.jpg
http://i18.photobucket.com/albums/b102/Donalddrift18/IMG_20110210_162412.jpg
http://i18.photobucket.com/albums/b102/Donalddrift18/IMG_20110210_162351.jpg

Rocks already chipped the lettering, Im thinking maybe installing an overlay would maybe protect it?

StatusKuo
02-20-2011, 12:12 AM
hey greg, does the cf plate come with the cf frame i saw at your shop? cause they were put together and i only saw one price.

glilly
03-12-2011, 12:15 PM
hey greg, does the cf plate come with the cf frame i saw at your shop? cause they were put together and i only saw one price.


CF plates do not come with frames, ...the frame you saw was something I did custom with the 3M DiNoc material.

The new carbon plates are now $50.00 (double sided, CNC cut), but do include standard one color graphics. +$10 for reflective lettering

97tegls
03-12-2011, 12:25 PM
can you do the black plates that have the white star on the left side? with 7 letters?

glilly
07-19-2011, 11:54 AM
can you do the black plates that have the white star on the left side? with 7 letters?

Yes, I can do anything y'all want.

Just so ya know, ...i've been seeing these plates all over town on people's cars. While they may look very legal, they in fact are not. I am not affiliated with the state of Texas, DPS, or TXDOT. I will continue to make plates as custom as you like, so long as you all realize they are NOVELTY PLATES. You will be required to sign a waiver of liability release upon purchase of an "OEM look" plate.

97tegls
07-19-2011, 12:32 PM
are these the same size as regular plates?

glilly
08-17-2011, 09:50 AM
are these the same size as regular plates?

yes.

volksnuts
10-26-2011, 10:01 AM
Would you be able to replicate the Texas A&M vanity plate?
http://i10.photobucket.com/albums/a127/volksnuts/396c25de.jpg

da9tegra
11-03-2011, 07:24 AM
i'll be stopping by in a couple weeks when i get back to town, want to get a pair of the black w/ white star plates made up

kuyo
11-06-2011, 10:08 PM
sent you a pm about LSU plates

04FstEp3
11-06-2011, 10:29 PM
pmed

glilly
11-14-2011, 10:31 AM
Original post updated with new pricing and new designs. We can do any design, but anything we DO NOT already have WILL BE EXTRA.

kuyo
11-15-2011, 12:18 PM
pm sent back

kuyo
11-21-2011, 10:56 AM
thanx for the plate...that was fast...just a word of advice, slap a fragile sticker on before mailing it..stupid usps took off a corner of my plate but its nothing extreme to bitch about...Already contacted usps to run me my money for damaged goods...Will be hitting u shortly for another one :D

glilly
12-05-2011, 02:01 PM
thanx for the plate...that was fast...just a word of advice, slap a fragile sticker on before mailing it..stupid usps took off a corner of my plate but its nothing extreme to bitch about...Already contacted usps to run me my money for damaged goods...Will be hitting u shortly for another one :D

sorry to hear about that. I have been writing DO NOT BEND, ...frikkin' postal service. :/

Coke Zeroe
01-23-2012, 12:16 PM
can I get a pair that says "Slow Z31"?
If so 10$ for the pair if I recall lol

Nemo
05-26-2012, 08:37 AM
Swt deal. Will be coming in real soon!

CRXSI
06-03-2012, 01:32 AM
Nice stuff... i would like a JDM on top say 92n the bottom be CB7.
& if possible another one that says 1sikcb7

kuyo
07-26-2012, 12:30 PM
pm sent

michael982
02-18-2014, 07:20 PM
Do you still make these?