gOtParTs?
01-10-2009, 07:27 PM
http://www.hi-upload.com/upload/uploaded10/Screen-saver.jpg
here is one of the cars that we are finishing up. we are waiting on some fittings for the abs relocation. mods to the car following the pictures.
http://www.hi-upload.com/upload/uploaded10/ojt1.JPG
http://www.hi-upload.com/upload/uploaded10/ojt5.jpg
http://www.hi-upload.com/upload/uploaded10/ojt41.jpg
ARISTO VVTI TT SWAP
AEM FIC
GREDDY modified fmic
GREDDY turbo timer
GREDDY boost controller
MEGAN dp modified
USDM twins modified to ttc
EGR block off
HKS RS intake
TEIN FLEX with EDFC
VERTEX Full kit w/hood add on
HKS carbon ti axle back
RECARO seats
DEFI GAUGE SETUP
Fal S blade push/pull 10" fans
HKS SSQV bov
GREDDY BREATHER TANK
minor wire tuck
and a few other things we are probaly forgetting. everything was done in house. car runs great, just cant take it out due to the wait on the fittings. We also took some cf we had laying around the shop and made some nice cf panels for the relay and ecu box underneath the hood. We also have his koyo radiator but will not be installing it til we have the new trans cooler setup. this setup is outfitted with the greddy breather tank setup that swirls all bubbles or trapped air inside the block at all times. A mod that we recommend on doing on everyones modified car! We also did the minor tuck on it. just rerouted and extended a few wires here and there. If you own an is300 you can see what we did. thanks for looking!
here is one of the cars that we are finishing up. we are waiting on some fittings for the abs relocation. mods to the car following the pictures.
http://www.hi-upload.com/upload/uploaded10/ojt1.JPG
http://www.hi-upload.com/upload/uploaded10/ojt5.jpg
http://www.hi-upload.com/upload/uploaded10/ojt41.jpg
ARISTO VVTI TT SWAP
AEM FIC
GREDDY modified fmic
GREDDY turbo timer
GREDDY boost controller
MEGAN dp modified
USDM twins modified to ttc
EGR block off
HKS RS intake
TEIN FLEX with EDFC
VERTEX Full kit w/hood add on
HKS carbon ti axle back
RECARO seats
DEFI GAUGE SETUP
Fal S blade push/pull 10" fans
HKS SSQV bov
GREDDY BREATHER TANK
minor wire tuck
and a few other things we are probaly forgetting. everything was done in house. car runs great, just cant take it out due to the wait on the fittings. We also took some cf we had laying around the shop and made some nice cf panels for the relay and ecu box underneath the hood. We also have his koyo radiator but will not be installing it til we have the new trans cooler setup. this setup is outfitted with the greddy breather tank setup that swirls all bubbles or trapped air inside the block at all times. A mod that we recommend on doing on everyones modified car! We also did the minor tuck on it. just rerouted and extended a few wires here and there. If you own an is300 you can see what we did. thanks for looking!