OFFICAL: TurboChargers.com Dyno Day - JUNE 7TH

[nester]

For the extra lazy, the important stuff is in bold.

Finally, after a lot of talk, I am proud to announce our first dyno day with the new dyno. As you may know, we have just recently purchased and installed a brand new Mustang AWD Dynameter, and we're ready to break it in proper.

In honor of this momentous occasion, we will be offering dyno pulls for $20. Yes, $20. This is for 3 pulls or 2 pulls and 1/4 mile simulation (that's right, on this dyno you can do a true 1/4 run simulation), no wideband. We will charge an extra $10 if your car is retarded low and we have to use special ramps, fork lifts, or any other implement of destruction to get you on the rollers. We can accomodate FWD, RWD, AWD, Diesel Trucks, etc.

We will start this at 10AM, Saturday June 7th. We will stay as late as midnight or so. If there are a ridiculous amount of cars left we will continue on Sunday if the need presents its self.

We will be grilling out, we'll probably raffle some stuff off, and we'll be kicking off our Dyno Shootout, where I'll have a special website showcasing the highest powered cars to touch the rollers. We'll also have prizes for the class winners.

We'll have 2 drums of Race Gas and 1 drum of Methanol on hand for those who want to purchase some to use on their rides.

This is a cash only event. No credit cards, No WIC, No Food stamps.

We are located at 290 and Bingle, on Burr Oak Drive, next to Mustang Cat. More info to follow, as it presents itself. Feel free to post questions, and let us know if you think you might want to come by. I know, nearly a month in advance, and you probably don't make plans more than 2-3 hours ahead.. but I'm not asking you to pay upfront.. ;)

[turbo_scooby]

One of your other dyno days on NASIOC you guys bent a lot of lateral links? Is Nathan from PDX going to be doing this? :) I'll go then.

[nester]

Ahh, the lateral link thing happened in 2004, and it was one guy, per google. Whoever did that no longer works for us, and I know I'm smart enough to not do that.

The PDX thing was a special even they set up. This isn't really a tuning event, more of a show off kind of thing.

[kryptonkid07]

sounds gewt!

[ComplexDreams]

For the extra lazy, the important stuff is in bold.

Finally, after a lot of talk, I am proud to announce our first dyno day with the new dyno. As you may know, we have just recently purchased and installed a brand new Mustang AWD Dynameter, and we're ready to break it in proper.

In honor of this momentous occasion, we will be offering dyno pulls for $20. Yes, $20. This is for 3 pulls, no wideband. We will charge an extra $10 if your car is retarded low and we have to use special ramps, fork lifts, or any other implement of destruction to get you on the rollers. We can accomodate FWD, RWD, AWD, Diesel Trucks, etc.

We will start this at 10AM, Saturday June 7th. We will go until the last car is done, or whenever we begin to regret that statement.. Whichever comes first.

We will be grilling out, we'll probably raffle some stuff off, and we'll be kicking off our Dyno Shootout, where I'll have a special website showcasing the highest powered cars to touch the rollers. We'll also have prizes for the class winners.

This is a cash only event. No credit cards, No WIC, No Food stamps.

We are located at 290 and Bingle, on Burr Oak Drive, next to Mustang Cat. More info to follow, as it presents itself. Feel free to post questions, and let us know if you think you might want to come by. I know, nearly a month in advance, and you probably don't make plans more than 2-3 hours ahead.. but I'm not asking you to pay upfront.. ;)





LOL @ NO WIC OR Food Stamps! :Goofy:

[jb103080]

i'd like to check out my stock power as well as my dad's trans am.

[nester]

This is an excellent chance to get baseline numbers before you make any big changes this summer.. Likewise, we'll be happy to sell you those big changes. We have big changes in stock!

[IIIVOVE]

anyway we can paypal in advance to get a guaranteed time slot? don't wanna wait 4 hours for 3 pulls especially since my car is completely stock.

[shuanmlim]

:rofl: at food stamps

[94CapriceSS]

Kinda interested in seeing what the wagon can do...and for 20bucks!? Fudge it. Ill see if my stepdad wants to get the z06 dynod too...

[Turbochargers]

I will accept payment in advance if you want to put your name on the list. It will be first come first serve on the day of testing. If you put your name on the list in advance you will have to be at the shop at 10:AM or you will have to resubmit your name to the list.

We are getting some of our vendors to put up prizes so we will be giving swag away all day. Be a great time for you sponsorship seeking guys to show why you are a good candidate

As far as the issues with the dyno on awd cars. Turbochargers.com has went through a lot of changes in the last 7 months we are totally restaffed, not to mention 1/2 the issue was with the dyno jet dyno and that it did not stop evenly. I can assure you the dyno will cause no issues to the cars, well other than breaking your ego if you have been telling stories.

We now have a Mustang dyno that leads the way in technology based dyno's for new awd cars. The guys from PDX did do a few subarus last week with no issues. We have the ability to spin non drive wheels in 2wd vehicles to keep high end cars out of limp mode.

Also we will not be doing any tuning on the dyno during the dyno day. If you would like tuned before the dyno day you can set up an appointment prior to the event to get the car running well and show off in front of everyone. This will also be a open house of sort and give everyone a chance to meet all the new employees and see the product lines we have picked up.

Thanks

-Kenny

[94CapriceSS]

^^^Can vouch! TXIC Just did a full 2 day dyno day at their shop, and my cousins 02 bugeye made some great power! He said the shop was fantastic!!


btw hes ordering his new clutch this week and nathan said he can get him more powah! lol

[Turbochargers]

Guys we made some changes to the time frame. We will stay til at least midnight if the need presents itself.

[chancek]

Can I have the physical address to the shop, becuase I want to prepay for my dyno pull. I know its only $20 but I was wondering can I come by in person and pay cash sometime this week to reserve me in early?



I will accept payment in advance if you want to put your name on the list. It will be first come first serve on the day of testing. If you put your name on the list in advance you will have to be at the shop at 10:AM or you will have to resubmit your name to the list.

We are getting some of our vendors to put up prizes so we will be giving swag away all day. Be a great time for you sponsorship seeking guys to show why you are a good candidate

As far as the issues with the dyno on awd cars. Turbochargers.com has went through a lot of changes in the last 7 months we are totally restaffed, not to mention 1/2 the issue was with the dyno jet dyno and that it did not stop evenly. I can assure you the dyno will cause no issues to the cars, well other than breaking your ego if you have been telling stories.

We now have a Mustang dyno that leads the way in technology based dyno's for new awd cars. The guys from PDX did do a few subarus last week with no issues. We have the ability to spin non drive wheels in 2wd vehicles to keep high end cars out of limp mode.

Also we will not be doing any tuning on the dyno during the dyno day. If you would like tuned before the dyno day you can set up an appointment prior to the event to get the car running well and show off in front of everyone. This will also be a open house of sort and give everyone a chance to meet all the new employees and see the product lines we have picked up.

Thanks

-Kenny

[beardsm]

Good question,can I as well.This will awesome to attend.I will definately be there.:thumb:Can I have the physical address to the shop, becuase I want to prepay for my dyno pull. I know its only $20 but I was wondering can I come by in person and pay cash sometime this week to reserve me in early?

[nester]

Can I have the physical address to the shop, becuase I want to prepay for my dyno pull. I know its only $20 but I was wondering can I come by in person and pay cash sometime this week to reserve me in early?

Turbochargers.com (3 Viewing)
5410 Burr Oak Dr., Houston, Tx 77092
Phone: 800-749-7111, Fax: 713-939-1111
"Leader in Turbo Charging Components, located right here in Houston. Largest Inventory of performance products in the Houston area, with our Retail Store now open."
Website: www.turbochargers.com

[ThEsLoOnE]

im gonna be there to get the stock whp so i can compare it when i put all my mods on...

[carguy]

KIDDIE MAP FOR THE NOOBS

http://i28.tinypic.com/2rxws5k.jpg

[spyder526]

where can we pay in advance

[thtguybryan]

Just to confirm, it's $20 for 3 pulls for all drivetrains? So I could bring out my POS and get it dyno'd too? Thanks!

[carguy]

where can we pay in advance

Come see as at the shop!

And yes, $20 regardless of drivetrain.

[integranoob]

Awesome! Will definitely be out there with some friends.

edit: sorry I'm at work, on a friend's account haha. (thtguybryan)

[turbo_scooby]

I will accept payment in advance if you want to put your name on the list. It will be first come first serve on the day of testing. If you put your name on the list in advance you will have to be at the shop at 10:AM or you will have to resubmit your name to the list.

We are getting some of our vendors to put up prizes so we will be giving swag away all day. Be a great time for you sponsorship seeking guys to show why you are a good candidate

As far as the issues with the dyno on awd cars. Turbochargers.com has went through a lot of changes in the last 7 months we are totally restaffed, not to mention 1/2 the issue was with the dyno jet dyno and that it did not stop evenly. I can assure you the dyno will cause no issues to the cars, well other than breaking your ego if you have been telling stories.

We now have a Mustang dyno that leads the way in technology based dyno's for new awd cars. The guys from PDX did do a few subarus last week with no issues. We have the ability to spin non drive wheels in 2wd vehicles to keep high end cars out of limp mode.

Also we will not be doing any tuning on the dyno during the dyno day. If you would like tuned before the dyno day you can set up an appointment prior to the event to get the car running well and show off in front of everyone. This will also be a open house of sort and give everyone a chance to meet all the new employees and see the product lines we have picked up.

Thanks

-Kenny
Nathan told me you guys were getting a new Mustang Dyno April 15. Did you guys get in your weather station?

[MaximaPower]

coool!! would love to see wat my car is putting down

[nester]

Nathan told me you guys were getting a new Mustang Dyno April 15. Did you guys get in your weather station?

We'll have a external thermometer and hygrometer.

[Turbochargers]

Dyno Day we will not accept CC. We are anticipating a large turn out and we are not going to worry about running CC all day.

It is $20 bucks for 3 runs or 2 runs and 1/4 mile simulation. We will have the store open for parts sales and CC will be accepted for that.

We plan to have the first car on the dyno at 10am

[DRKBLUHATCHver2]

But I thought we broke the dyno in proper, those are our burnout marks on it:eek3dance

im gonna try to bring the blue car out to have some turbochargers.com dyno raping extravaganza, ill bring the food stamps.

[nester]

Nice.

I will have the website ready, we will have top 10 power, along with dyno charts online.

We can also do the top 10 lowest power, get your beater featured!

[Negative01]

Nice.

I will have the website ready, we will have top 10 power, along with dyno charts online.

We can also do the top 10 lowest power, get your beater featured!

I might have to get in on that:thumb:
Slowest 3S-GTE Turbo Celica on the planet:rock:

[chancek]

List of whos going to be the for sure not maybes...

1.chancek
2.integranoob
3.beardsm
4.
5.
6.
7.
8.
9.
10.

[94CapriceSS]

meeeeee

[jb103080]

1.chancek
2.integranoob
3.beardsm
4.jb103080 and my old man
5.
6.
7.
8.
9.
10.

[Bugermass]

Hehe, I can vouch for the dyno, its bad ass, I've tuned on it a couple times already, its Flawless.. I'll prolly be there with dave as well so if any of you honda guys want some tweaking prior to the event let us know, I can arrange with kenny to get some roller time before the event.. See everyone out there.. :rock:

[NITROUS*ADDICT]

so is it only on saturday r is it going to run in to sunday as well

[nester]

so is it only on saturday r is it going to run in to sunday as well
Plan on it only being Saturday. We'll only roll into Sunday if we run out of time.

[peteyd]

Plan on it only being Saturday. We'll only roll into Sunday if we run out of time.

hrm...prolly gonna swing by after I get out of work....oh btw welcome to houston sean bouts time!

[jb103080]

Plan on it only being Saturday. We'll only roll into Sunday if we run out of time.

Wanted to stop by and pay for my spot on saturday if that's cool. :thumb:

[opie2184]

ill be coming by to see what my stock car does before the mods

[jlinky]

i might swing by after work...

[Negative01]

I might have to get in on that:thumb:
Slowest 3S-GTE Turbo Celica on the planet:rock:

Definetely gonna be there for sure in the AM:rock:
Can't wait to see the stock numbers

[Los]

i might swing by after work...
Let me know what time, I would like to see what my car and maybe my truck are putting down.

[OneArmedScissor]

ill be there as early as i can!

[chillin014]

is there an official list going on yet? and was the paypal thing ever confirmed to get on the list?

[jlinky]

Let me know what time, I would like to see what my car and maybe my truck are putting down.



I get off or work at 5 so will be there to dyno about 6:20, hopefully the weather will be cooler...

[Los]

let me know when you are heading over there. I will meet you there.

[ProjectS15]

bump for a great dyno!
i was tuned on it 2 weeks ago :rock: