Dyno charges

[vdshenoy]

A lot of us probably want to know...I sure do.

how much do you charge for your dyno equipment rental or for say 3 runs?

Would you be willing to do a Dyno day if enough people wanted to show up?

[VashThaStampede]

Ooooooohhh all wheel dyno?

[peteyd]

Ooooooohhh all wheel dyno?

yes its an awd dyno

[heyitsryan]

A lot of us probably want to know...I sure do.

how much do you charge for your dyno equipment rental or for say 3 runs?

Would you be willing to do a Dyno day if enough people wanted to show up?

Damn i would be down for this. ouldn't want to embarass you though Ven, :rofl:.

[Turbochargers]

We have not set dyno pricing yet. To be honest the dyno area is a little rough and we need to clean it up still. It is an AWD dynojet I would love to do a dyno day so that we can meet a lot of you. I would do this cheap to bring everyone out.

I might try to do this between t-day and x-mas. Maybe 20 bucks for 3 pulls or something cheap to get everyone to come out. Get a grill fired up and call it a day.

[eder-loco]

20bucks is a fkin deal. if you doit next month am down.

[txmica3]

holy hell, 20 bucks?! im down like chinatown!

[vdshenoy]

I'm in....Is this a dynojet AWD dyno??

[David NA->FI]

Yes, seen it before, it's nice.

[i-vtec]

holy cow $20 hell yeah im in.....but I dont have a car anymore :gonk:

[abh316]

holy cow $20 hell yeah im in.....but I dont have a car anymore :gonk:

bring your bike and see how much hp you got.

[hyperenergy]

damn 20 bucks i want to come out and see what kind of numbers Im putting down now

[2.0 DA]

damn 20 bucks i want to come out and see what kind of numbers Im putting down now
A whooping 145 whp....

[txmica3]

bring your bike and see how much hp you got.

lol @ same ideas.

except i was thinking of holding on to a pole and running on the dyno.

FootHP FTW!!1

[gsxterboy]

I am down also, want to see how my rdx pulls, without hondata, and with it.

[KrazyDriverSuK]

dang.....!!! good price...

[chancek]

So when and where is this place where you can dyno for $20 ? Can I get an address ?

[nester]

We do not have a date for this dyno day yet.

We are located at 290 and Bingle, at 5410 Burr Oak Dr. Across the street from the monstrous Mustang Cat dealer.

[lowness]

count me in for a dyno day.

[tiedupfool]

I want to take the 325e in for a base dyno

[d98gt]

I'm also interested in some dyno runs.

You guys offer wideband runs? Send me a price in a PM if you have something figured out.

[nester]

If you have a port for it, yes. If you want the sniffer, not currently. We need to order a new clamp on holder.. ours grew legs. :dunno:

[kryptonkid07]

I wanna see where my car stands stock... or well, with an intake. So i know where to go... or how much I gain in the future.


and for 20 bucks!!! That's a steal.

[limgo]

hell for 20$ i'd probably dyno the diesel jeep :lol: even if i'm too broke to dyno when u do decide to do a dyno day i'll show up for sure

[RotaSpinna69]

I'm in

[89Iroc]

for $20... count me in

[txmica3]

is there a date yet for this?

i have a wideband on my car (aem), any way you could datalog my a/f's as well as hp/tq? the aem has a white wire and a light blue wire (iirc one was for datalogging) but i cant remember which one.

[Angr-E1]

nice hopfully i can get my car running the "right" way when you guys do decide to have this little event.

[d98gt]

is there a date yet for this?

i have a wideband on my car (aem), any way you could datalog my a/f's as well as hp/tq? the aem has a white wire and a light blue wire (iirc one was for datalogging) but i cant remember which one.

I would imagine that they could do that on another day other than the H-I Dyno Day. It'd take a little longer to hook up and etc. Hit them up with a PM and get a quote. That's what I did ;)

[txmica3]

I would imagine that they could do that on another day other than the H-I Dyno Day. It'd take a little longer to hook up and etc. Hit them up with a PM and get a quote. That's what I did ;)

oh ok, that was part of my question. if/when the dyno day was and if i could get the same rate on another day.

im in no rush so if i dont hear in the next day or two ill pm, call, or just stop by.. not too far from me. :thumb:

[nester]

is there a date yet for this?

i have a wideband on my car (aem), any way you could datalog my a/f's as well as hp/tq? the aem has a white wire and a light blue wire (iirc one was for datalogging) but i cant remember which one.

When a date is set, we will post it here.

You can remove the AEM sensor and install our sensor. One of the wires on the AEM does output a 0-5v output, but we don't have an input on the dyno for that.

[txmica3]

When a date is set, we will post it here.

You can remove the AEM sensor and install our sensor. One of the wires on the AEM does output a 0-5v output, but we don't have an input on the dyno for that.

ah, i see. if its that much work i might not.. the car has stock tune so its nothing special, just getting a baseline before i start ripping the car apart on the custom boost set up.

i guess ill just get the baseline (a/f is stock anyway) and when i do the after ill do the logging. unless im feeling adventurous :Goofy:

[DjKompressor]

im in! i want to dyno my hybrid honda insight to see what im putting down to the wheels! hahah

[FRIJames]

I will swing by Kenny when I get in town! Thanks for showing us the dyno while I was in Houston 2 weeks ago!

[KrazyDriverSuK]

When a date is set, we will post it here.

You can remove the AEM sensor and install our sensor. One of the wires on the AEM does output a 0-5v output, but we don't have an input on the dyno for that.

do it alil after christmas!:thumb:

[nester]

Probably will be the case, we've been too busy to focus on this right now.. We want it to be a cool event, so it'll probably be after the holidays.

[RacingEmotions]

wow. this sounds like fun. after the holidays sounds real good, whenever everyone somewhat starts to recover from all the christmas shopping

[DD ROCKS]

i am in

[shuanmlim]

count me in for a dyno day.

[d98gt]

I'll be in if I don't get it done with you guys BEFORE the meet.

[dekansnowman]

I'm in the thread just waiting for a dyno date! My CA is suprising me with this newer turbo so I wanna know how she is doing..

[lowness]

after the holidays bump:thumb:

[shuanmlim]

so how about this dyno day?!:thumb:

[DoPiE]

i would like to see what kind of numbers my 'stang is putting down right now

[d98gt]

There are quite a few shops that you can get some baseline runs in. If you want to feel good about yourself--find a dynojet. If you want "real" heartbreaking numbers, find a mustang dyno.

[DoPiE]

so wheres there a mustang dyno around on the southside?

[lowness]

February Bump:thumb:

[NOPISTN]

soo, is this going to happen? I'd like to do a few pulls and just check out the shop.

[lowness]

March bump:rock:

[nester]

We are making some big changes in the Dyno Area. As soon as this work is completed, we will set something up. Know this is been drug out for months, but we've simply been too busy selling parts! Which is a terrible problem to have! haha.

[Turbochargers]

Guys we bought a new dyno. The dyno is a few weeks out, I am not sure if we will do a dyno day until we get it.

I know I have been pushing this back just been busy.... Stick with us it will be a good time...Where else you gonna dyno for 20 bucks?

Thanks

[txmica3]

this should go on for more than one day. there is no way in hell all these people are going to dyno in a day.. its just not possible to strap down/set up readings for that many people.

just my .02

oh btw, i may need to bring a turbo to you guys to look at a possible rebuild lol

[ThEsLoOnE]

So have we found out when this is gonna happen??

[LoudDanny]

So have we found out when this is gonna happen??

[lowness]

May bump:rock:

[nester]

We just got the new dyno working last night.

Here's a pic from last week when it was delivered.

http://www.turbochargers.com/gallery/albums/album06/IMG_5271.sized.jpg

We've still got to finish getting familar with it, and we need to do some shop work (note big hole in floor) before we can really have a ton of people in there.. I'm thinking mid-June.

[LoudDanny]

shit is sweet!!!!!!!!!

[Pitlab77]

what type, model?

[nester]

what type, model?
We got two of the big ones, and they were overnighted from Japan. We put it on the tab at Harry's.

I think it's the MD-AWD-500-SE

[biglos]

We got two of the big ones, and they were overnighted from Japan. We put it on the tab at Harry's.



:rofl:

[lowness]

f*cking fast and furious quotes are still being used 7 years later. that shit is timeless

[nester]

I watch it weekly, you know.. just to keep in touch with my inner ricer.

[Turbochargers]

We have started a new thread for the dyno day. It is offical and it is going to happen.

thanks.

[jc0526]

We got two of the big ones, and they were overnighted from Japan. We put it on the tab at Harry's.

I think it's the MD-AWD-500-SE

ha, i just got that!