View Full Version : Camber
eternalsun
05-03-2005, 08:55 AM
Is there any DIY way to fix a slight camber problem on a 94 Accord? The front tires have a little and I can see it on the tires. I really don't want to spend the money to adjust the camber seeing how it is barely off. The rear I have no problem with but the front it a little off. The car is only about 2 inches lower than stock, not even close to slammed. Thanks.
jsEM16
05-03-2005, 05:17 PM
Why dont you get an alignment first? Just by looking at it, you cant get an accurate look if your camber is off. Also, camber dont wear down your tires as fast as if your toe is out spec. Im running 1.7-1.8 neg camber up front with no kit, and with proper tire rotation, im getting excellent tread life on my tires
eternalsun
05-03-2005, 08:34 PM
Why dont you get an alignment first? Just by looking at it, you cant get an accurate look if your camber is off. Also, camber dont wear down your tires as fast as if your toe is out spec. Im running 1.7-1.8 neg camber up front with no kit, and with proper tire rotation, im getting excellent tread life on my tires
I never thought of that. It is only wearing on the inside, nowhere else.
juice07
05-09-2005, 09:08 PM
Hey, guys you know where I can go to get my springs and camber kit put on
my car. I am looking for a place that will do it cheap and a good job. Like a mom and pop shop. :hs:
juice07
05-23-2005, 07:22 PM
Got them in already. Looks sharp. :D :waycool:
vBulletin® v3.6.8, Copyright ©2000-2009, Jelsoft Enterprises Ltd.