**HELP, Si REAR DISC ON 97 EX**

[RAUL]

WELL, LAST NIGHT I CHANGED THE REAR DRUM TO DISC FROM AN Si TO MY 97 EX. DID THE HOE SWAP TRAILING ARMS,COMPENSATOR ARM,LOWER ARM,AND UPPER ARM. NOW THE BAD THING ABOUT IT IS THAT MY CAR IS THREE FINGERS GAP ON THE PASSANGER AND LESS THEN ONE FINGER GAP ON THE DRIVER SIDE. HAVE NOT TAKEN MY CAR TO GET AN ALIGNMENT. WILL THE ALIGNMENT HELP OR DID I DO OR PUT SOMETHING WRONG....
:-/ :-/ ANY HELP IS HELPFUL :-/ :-/

[SKYLINE]

ONE OF THE TRALING ARM COMPONENTS MUST BE BENT
JUST TAKE THE HUB OFF OF THE STOCK ONES AND PUT THE HUB ASSEMBLY ON YOUR STOCK ONES .YOU WILL HAVE TO TAKE OFF THE ENTIRE DRUM BRAKE ASSEMBLY BUT...THAT WILL HELP
THEY ARE ONLY 4 TORX SCREWS WHICH ARE A BITCH TO TAKE OFF!! (UNLESS YOU GOT THE TOOLS)