how do i make a GSR cluster work on my civic

[Sloshy]

i have a dx civic hatch no rpm on it so i got a gsr clzter i eant to put on. I hooked it up but it works all wrong who knows the way it hooks up so it works properly?

[LamTran]

you got the diagram of the comparison of the harness of both cluster?
btw, what yr?
i have a dx civic hatch no rpm on it so i got a gsr clzter i eant to put on. I hooked it up but it works all wrong who knows the way it hooks up so it works properly?

[Sloshy]

nope i dont have a diagram but the cluster is of a 00 gsr and my civic is
a 97 it has no RPM wire

[LamTran]

you can grab a tach signal from blue wire from a 2pin harness at the distributor, the blue wire looks like 14-16 guage, but its mostly insulated. you can also pick up tach signal from any fuel injector, uncommon wire color.

check on Hondahookup.com for service manuals.

after that list all the wires of both car and ill take it from there.

[DRKBLUHATCHver2]

Made this a while back when i put a teg dash in my car:

*Take note this is for M/T, if you need the additional pins for A/T hit me up*

** On civic gauge cluster, there is four plugs:
-A (has 5 pinout holes)
-B (has 5 pinout holes)(**Upshift ind** not used)
-C (has 10 pinout holes)
-D (has 12 pinout holes)
-E (has 14 pinout holes)(**A/T** not used)

** On integra gauge cluster, there is four plugs:
-B (has 16 pinout holes/ Blue and on top left of the back of the gauge cluster)
-C (has 10 pinout holes/ Blue and on top right of the back of the gauge cluster)(**A/T** not used)
-A (has 5 pinout holes/ Yellow and on the bottem left corner of the back of the gauge cluster)
-D (has 13 pinout holes/ Blue and on the bottem right corner of the back of the gauge cluster)

---Now you know this, lets do the converting:

**CIVIC---TO------Integra**

A1-blu----------------A5
A2-n/a
A3-blk----------------A3
A4-n/a
A5-blk/yel------------A1

C1-blu/wht-----------B1
C2-grn----------------B7
C3-yel----------------D4
C4-yel/grn------------D7
C5-blk----------------A3
C6-grn/org------------D1
C7-n/a
C8-blu/red------------B8
C9-grn/red------------B16
C10-red/grn-----------B15

D1-red----------------B9
D2-red/blk------------B10
D3-blk/yel-------------B11
D4-n/a
D5-blu----------------D13
D6-n/a
D7-yel/red------------D11
D8-wht/blu------------D9
D9-grn/blu-------------B13
D10-grn/yel------------B14
D11-yel/blu------------B6
D12-yel/wht-----------B3

*That should be about it, if anything dosent work then you messed up somewhere, cause i double checked everything, and i cross referenced everything with info and pin-outs from Alldata and then checked them with Honda manuals too.



-DRKBLUHATCHver2

[Sloshy]

thanks guys thank alot ill try this this weekend thanks for info