View Full Version : brakes lights don't work
Bobby808
04-07-2005, 08:55 PM
I just had a b16 swapped into my crx and I noticed the brake lights are now out. Tried replacing fuse under hood on passenger side since it was blown, but when I put a new one in it blew after trying brakes, what should I check that would cause fuse to blow. thanks
Juanito
04-07-2005, 11:52 PM
Happened to me in my crx i checked the entire car for any exposed wiring and i found some and i taped it up with electronic tape and that worked for me
initial what?
04-08-2005, 06:52 PM
either that or a ground you missed
mikesrex
04-08-2005, 06:58 PM
some wires are shorted somewhere. You'll have to figure out where the short is and fix it. Bare wires could be touching the frame of the car, or perhaps a brake light bulb is smashed and the bulb itself is causing the short.
Bobby808
04-10-2005, 02:31 PM
Figured it out. Brake light switch was wired wrong into ecu causing short. Thanks for all the replies though.
vBulletin® v3.6.8, Copyright ©2000-2009, Jelsoft Enterprises Ltd.