5-Lug Conversion

[ITR Hatch]

I have a 99 GSR engine in my hatch and I am wanting to know if the integra axels I have will fit in place of the ones that would normally come with the complete 5-lug conversion? Thanks

[gangstarchichi]

as long as you get the USDM 5 lug conversion, the axles will fit, you should also change out the brake booster, and proportional vavle

[ITR Hatch]

what if its the JDM one? i'd need the spindles or something?

[Booost]

no, you can use JDM 5-lug as well have it on my hatch, no change in spindles or axels.

[Drink Tapioca]

if you get the jdm 5-lug conversion, than you have to use the jdm itr axle. You can't use the one you have now.

[babietuan323]

jdm are 36mm
usdm are 32

[mikesrex]

jdm are 36mm
usdm are 32
werd

[frankenstein]

if you get the ctr five lug (which has the same rotor size, 15'' in the front and 14'' in the rear) the usdm axles bolt up...

[SecretAgent]

no, you can use JDM 5-lug as well have it on my hatch, no change in spindles or axels.

someone lied to you. don't make me go pull off my axles to prove a point. the JDM's are 36mm like the preludes, USDM's are 32mm like all the other b-series.

[frankenstein]

onl suspension bolts up with the usdm axles...

i second that
^^^^^^^