Swap Help Needed

[Booost]

Putting in a obd2 Si motor in a eg hb, need help on alt. is there any way to make a jumper for the obd1 alt. plug to plug up to the obd2 b16 alt. I have already switched over injecotrs and made a dizzy jumper, last thing I need is a alt.
Cliff Notes: Need some type of wiring diagram that shows which wire are what on a 99-00 Si, or instructions on how to mkae a obd1-obd2b alt jumper.

[crx-si]

should have use 96-2000 integra harness would have save u alot of headache, use a 1990-1995 integra alt, or use the stock sohc obd1 alt with modified upper bracket :thumb:

[Booost]

should have use 96-2000 integra harness would have save u alot of headache, use a 1990-1995 integra alt, or use the stock sohc obd1 alt with modified upper bracket :thumb:
well we got, i could not have used the Si harness, would't plug in to anything on the car. Thanks for the replies though

[mikesrex]

well we got, i could not have used the Si harness, would't plug in to anything on the car. Thanks for the replies though
the OBD2 integra harness will plug directly into the alt and a few other things you will need to run on the B16A2. Keep in mind that the injector plugs, alternator, distributor, and a few other things differ between the B16A2 harness and the EG civic.

while the 99 civic harness won't work, the integra harness will.