PDA

View Full Version : need help pinpointing my problome

sleepercrx
03-29-2005, 09:44 PM
i need to know what everyone thinks could be wrong with my motor .....while im crusing sometimes 2- 3k the car lurches or kinda jumps a lil bit sumtimes hard sumtimes soft i was thinking maby TPS but i duno and then i got in my car yesterday and it seemed to go throguht the Rpms faster but making no power like there was no tourqe like there use to be also the car dosent seem as loud... the motor is a camed ls motor with titanium vale springs and retainers and other misc stuff if u care at all.
cypher
03-29-2005, 09:51 PM
fuel system? ecu? what else is done
sleepercrx
03-30-2005, 08:21 AM
fuel system? ecu? what else is done

um ya its a b16 comp chipped at pyr 8.5k rev lim no speed lim
im pretty postive its a stock or close to stock fule system
DA_LsVtAk
03-30-2005, 10:28 AM
my car did something similar to that, but when i took it to autozone for some friendly advice they said it was my fuel system, then i went to the honda dealership and they said it could have been my EGR valve or TPS sensor.... after about 3-4 more days i got pissed and desided to trouble shoot it, so when i started out i went to the distributor and it turns out the rotor was rounded out in the inside causing it to sputter, figures it is always the $5 part that breaks u down... i say u check that first then move on could be anything tho are u throwing any codes?
mikesrex
03-30-2005, 12:40 PM
is the check engine light lighting up? do you know what sensors have been disabled on your ECU?

what all is not stock on your motor?
sleepercrx
03-30-2005, 01:15 PM
is the check engine light lighting up? do you know what sensors have been disabled on your ECU?

what all is not stock on your motor?


No its not throwing any codes but i had this same problome about 3 weeks ago and it lurched hard and the check engine came on for like a 10 min drive home and the next morning i was gona check the code but the light was off when i started it..and the car ran like a champ till now ..

its got cams,cam gears, titanium valve springs/Retainers.. cant rember anything else right now
no i dont know what sensors have been disabled