INTEGRA DASH ON EG...HELP !!!

[SKYLINE]

I NEED HELP TO CONNECT THE LAST FEW WIRES THAT I DONT KNOW WHERE TO CONNECT.... THE ONES TO THE CLUSTER TO BE EXACT!!
IF ANYONE HAS DONE THIS OR KNOWS ANYONE LET ME KNOW ASAP !!!832.863.8477 HUGO
I REALLY WANT TO GET DONE WITH THIS TODAY OR TOMORROW BEFORE 2 PM
I WILL GIVE THEM 12 VIP PASSES TO THE ALAMO DRAFTHOUSE(MOVIES)THEATRE IN WEST OAKS MALL AND $20 BUCKS +++++ I WILL ALSO HOOK THEM UP AT MY JOB " TRACK21 ", AN INDOOR GO KART TRACK FOR 2 RACES
THATS ALREADY A LOT OF CASH VALUE RIGHT THERE

WWW.TRACK21.INFO

[MATT87GT]

Try pming DARKBLUHATCHver2 , He is good with wiring and I'm almost positive he has done this conversion on his own car. But he will probably just want money , no movie passes or track21 passes.

But if he hooks you up I want a track21 pass!!!

[LamTran]

no help here buddy, might want to check w/ a EG forum.

[SecretAgent]

what dash into what car?


and to the smart asses, you still moved this to the wrong forum. gg

[SKYLINE]

A 94 INTEGRA DASH INTO A 95 CIVIC EX COUPE
THANKS CrudeLude

[Mr.Honda]

i have it done in my eg but i jus want cash

[Gooback]

:thumb:
and to the smart asses, you still moved this to the wrong forum. gg

Yeah and this isn't the first mistake they have made...Its a crying shame that the people that represent this board are the ones who make it look like shit....... :rolleyes:



anyways you whould check on www.honda-tech.com they had a write up there not to long ago, just try the search button in that forum, good luck

[mikesrex]

it's not really a performance mod, but since the specifics of wiring the integra stuff into the civic are being discussed, this topic does loosely fit in this section.

Please stop postwhoring this guy's thread. I'm deleting all the useless posts.

good luck with the wiring man. Let us know how it goes.

[fug_mo]

A 94 INTEGRA DASH INTO A 95 CIVIC EX COUPE
THANKS CrudeLude

PM me your email address and I'll send you my diagram for the cluster swap wiring.

[DRKBLUHATCHver2]

Ok, here we go. I sat down and put this in words you can work with, you also better be hookin me up with some passes cause i sat and did this, it took me an hour!:

*Take note this is for M/T, if you need the additional pins for A/T hit me up*
*This is also for a 96 gauge cluster, should work but might be different*
** On civic gauge cluster, there is four plugs:
-A (has 5 pinout holes)
-B (has 5 pinout holes)(**Upshift ind** not used)
-C (has 10 pinout holes)
-D (has 12 pinout holes)
-E (has 14 pinout holes)(**A/T** not used)

** On integra gauge cluster, there is four plugs:
-B (has 16 pinout holes/ Blue and on top left of the back of the gauge cluster)
-C (has 10 pinout holes/ Blue and on top right of the back of the gauge cluster)(**A/T** not used)
-A (has 5 pinout holes/ Yellow and on the bottem left corner of the back of the gauge cluster)
-D (has 13 pinout holes/ Blue and on the bottem right corner of the back of the gauge cluster)

---Now you know this, lets do the converting:

**CIVIC---TO------Integra**

A1-blu----------------A5
A2-n/a
A3-blk----------------A3
A4-n/a
A5-blk/yel------------A1

C1-blu/wht-----------B1
C2-grn----------------B7
C3-yel----------------D4
C4-yel/grn------------D7
C5-blk----------------A3
C6-grn/org------------D1
C7-n/a
C8-blu/red------------B8
C9-grn/red------------B16
C10-red/grn-----------B15

D1-red----------------B9
D2-red/blk------------B10
D3-blk/yel-------------B11
D4-n/a
D5-blu----------------D13
D6-n/a
D7-yel/red------------D11
D8-wht/blu------------D9
D9-grn/blu-------------B13
D10-grn/yel------------B14
D11-yel/blu------------B6
D12-yel/wht-----------B3

*That should be about it, if anything dosent work then you messed up somewhere, cause i double checked everything, and i cross referenced everything with info and pin-outs from Alldata and then checked them with Honda manuals too.

* If you cant do it hit me a pm and we can work something out.

-DRKBLUHATCHver2

[DRKBLUHATCHver2]

Also, the articles on www.honda-tech.com do not get into the wiring part of this, just fitment, as far as i know, this will be the most detailed pinout info you will find.

**when doin this, DO NOT CUT AND SOLDER, DO THE PINOUTS!!!!!!**


-DRKBLUHATCHver2


maybe Ill post this on hondatech......

[MATT87GT]

Good going DARKBLU!!!


Waits for track21 passes....

[SKYLINE]

hey im sorry i should of said this but i have gone to honda-tech and i saw the thread...it said the pin out thing
well the problem is i dont know how to mess with that kind of shtuff
i mean there must be something that reads them electronically which i dont have im sure

[DRKBLUHATCHver2]

hey im sorry i should of said this but i have gone to honda-tech and i saw the thread...it said the pin out thing
well the problem is i dont know how to mess with that kind of shtuff
i mean there must be something that reads them electronically which i dont have im sure

You want me to wire it up?

[Mr.Honda]

Also, the articles on www.honda-tech.com do not get into the wiring part of this, just fitment, as far as i know, this will be the most detailed pinout info you will find.

**when doin this, DO NOT CUT AND SOLDER, DO THE PINOUTS!!!!!!**


-DRKBLUHATCHver2


maybe Ill post this on hondatech......

actually i didnt do pinouts i just cut into my wire loom so that i could keep both me original eg connectors and my new type-r dash connectors. but the both work huh? :thumb:

[SKYLINE]

DRKBLUHATCHver2
I NEED YOU BAAAD!!!!
SORRY IF THAT SOUNDS GAY

[fug_mo]

Email sent...what problem's are you having with the cluster swap?

[SKYLINE]

HEY GUYS I NEED HELP STILL!!!!
JAMES IS A RESPECTFULLY BUSY GUY AND WASNT ABLE TO COME THRU
SO $30 BUCKS TO WHOEVER CAN CONNECT MY GAUGES CORRECTLY