how much???/

[lowpsi]

How much does a straight 91 240 hatch shell run for?
how would a 96 and up go for?
thanks............Z

[lazymofo]

depends the price well never b accurate!

i got my S13 for 500 bucks witha motor..

a perfect shell should go for about 1000-1600

a S14 no clud :yeahno:

[lowpsi]

depends the price well never b accurate!

i got my S13 for 500 bucks witha motor..

a perfect shell should go for about 1000-1600

a S14 no clud :yeahno:
thaanks

[skr33t_rac3r]

there was a 89 hatch shell with full interior and suspension on h-i for 300 like 2 months ago

[slideways2004]

there is 25% chance that i might have my shell for sale. it's a 90 coupe. pm me if you want more info

[NiS13]

there is 25% chance that i might have my shell for sale. it's a 90 coupe. pm me if you want more info

ooohh what color and model....i've been wanting a coupe for a while

[lazymofo]

ooohh what color and model....i've been wanting a coupe for a while

why the hell u need one for?

[lowpsi]

I already have a 91 hatch, was really looking for a 95 or newer...
how much you want for the 90 coupe and is it in good shape?
holla..........Z

[slideways2004]

i will let you guz know in a couple of days if it's for sale, if everything goes as planned, it will be for sale.

some info on it, 90 coupe , pretty much strait body, smooth trunk, s14 seats. there's a shitload of other stuff, i don't know exactly what all i'm including or going to keep, the price will be set according to the stuff on the car(redtop engine :thumb: )

[NiS13]

why the hell u need one for?

casue coupes are the shiznit

[slideways2004]

casue coupes are the shiznit

yeah, coupes are the shiznit. if i have mine for sale, what kind of car would you guz be looking for. shell w/o motor, unfinished sr20 project, or complete sr20 running car?

right now the car is an unfinshed project. the engine is in their and the harness is all done. just need to install a whole bunch of stuff, like greddy v spec i/c, and other little stuff. oh yeah, i still have to paint the car, it's primer right now

[NiS13]

for real i'd just move everything over from my hatch to the coupe...all i'd really want is interior....but i'd swap my suspension, wheels, motor then i'd send it right to paint...i just prefer the coupes over the hatches

[ProjectS15]

how much do you want for the coup?
running perferly WITHOUT the SR :thumb:


Dirk: stick with the hatch it makes you
gogogo Yellow Taco! :eekbunny: :thumb:

[NiS13]

how much do you want for the coup?
running perferly WITHOUT the SR :thumb:


Dirk: stick with the hatch it makes you
gogogo Yellow Taco! :eekbunny: :thumb:

u can have the yellow taco...i'll give u the coupe

[andrave]

in my experience, if you are buying from non-enthusiasts (they charge more) then youre pricing is kind of as follows:
for a beat ass car that isn't running 300 and under. for a decent car that isn't running, 500-800... about the same for a running car this is beat up.
For a decent all around car, 1200 or so is fair. dohc a little more, etc. s14's are priced all over the place... some 98's are still going for nearly 5 figures, while there is a 95 for sale in houston for 2500...
In general though I wouldn't pay more then 800 for a perfect s13 "shell" or more than 1500 or so for a perfect s14.

[slideways2004]

well first off, i don't have the KA, so it can't be running w/o the SR. i kinda wanted to sell it with the sr because then i don't have to part it out. to part it out, i would have to take everything apart. for a perfect running sr20 koop, my asking price would be 5k. that's pretty cheap because the motor has low miles(32k) and it has a lot of extras. t28, 3 inch down pipe, 3 inch exhaust, greddy vspl, koyo rad., turbo xs bov, walbro fuel pump. the previous owner put some do-luck fender flares in the back, so those are still on their.

[NiS13]

damn all i wanted was just the body and interior

[slideways2004]

anybody who is interested, just pm me for details

[Ris4Drift]

i have a 91 hatch shell. i can sell it for cheap if you are looking for a bare shell. send me pm if you interested. its straight.

[lowpsi]

i have a 91 hatch shell. i can sell it for cheap if you are looking for a bare shell. send me pm if you interested. its straight.
I already got a hatch
thanks........Z