PDA

View Full Version : 240 specialist needed

lowpsi
11-08-2004, 11:50 PM
Who make a good set of sub-frame spacers for the 91 240?
Are the spacer only usefull if used for drifting?
and is there a place in town where I might be able to buy them...
Also are the nismo engine and tranny mounts choice would another brand be better?
thanks....................Z
ProjectS15
11-09-2004, 12:53 AM
www.splparts.com
NismoFreakS14
11-09-2004, 01:15 AM
Who make a good set of sub-frame spacers for the 91 240?
Are the spacer only usefull if used for drifting?
and is there a place in town where I might be able to buy them...
Also are the nismo engine and tranny mounts choice would another brand be better?
thanks....................Z

Suggest Cusco or Uras mounts over the Nismo's.

The collars are good for anything, they just take up slack in the subframe mounting points.

The tilt spacers are used for altering the anti-squat geometry of the rear subframe. They shim the subframe about 1.5 degs. either way depending on how you install them. This in turn alters the geometry to provide more or less traction.
lowpsi
11-09-2004, 08:10 PM
Is there anything else you guys suggest that I do while the motor is out and apart..I'm doing a ka-t. It's going to be fully built when finished..
thanks.........Z
NiS13
11-10-2004, 12:09 AM
www.splparts.com

^ werd....kazamma makes some nice ones also samething just different color and price
KeiichiLe
11-10-2004, 03:21 AM
I love SPL's Engineering... got their brake lines. Brilliant how they thought of teflon coating them. THeir parts are like wanted all over the world but only sold in the US.. not only that but IN TEXAS !!! :thumb: :thumb: :thumb: I love all their stuff :( I wish i can take off my wheel and see every piece is shiny and crhomed :wompwomp:
slideways2004
11-10-2004, 07:37 AM
i also have spl brake lines. they are absolutely awesome. their parts are very good. i'm hoping to get some RUCA's from them pretty soon. oh yeah, i have their tension rods too. aren't they located in Austin :eek3dance
NismoFreakS14
11-14-2004, 02:37 AM
I work for SPL ... does that count? :eekbunny:
Project240
11-14-2004, 11:41 AM
I work for SPL ... does that count? :eekbunny:

thast badass, you think you could get me a hookup on some parts?
andrave
11-14-2004, 01:41 PM
yeah spl came through in a pinch and got me my stainless clutch lines in 2 days when I needed them (shipped to WV).
evoandy
11-14-2004, 03:36 PM
get them from SPL. They rock.
NismoFreakS14
11-14-2004, 10:36 PM
thast badass, you think you could get me a hookup on some parts?

Depends on what you order, and how big of an order.
NismoFreakS14
11-14-2004, 10:51 PM
Depends on what you order, and how big of an order.

Didn't get a chance to edit this but ... keep in mind that we aren't an advertiser on H-I so I can't exactly use it as a means to sell parts.

There are easy means by which to contact me otherwise.
-=E36=-
11-14-2004, 11:41 PM
Didn't get a chance to edit this but ... keep in mind that we aren't an advertiser on H-I so I can't exactly use it as a means to sell parts.

There are easy means by which to contact me otherwise.

Alan is a badass.

Ryan
lowpsi
11-18-2004, 11:18 AM
Nismo- I need a couple thing for my 91 240. Actually what suspension pieces do think is are a must.. As in tension rods and braces.. I dont want drift set-up. I want a good street up.. I want somthing fun to drive..
Please let me know asap..
thanks in adavnce............Z

luvitman@aol.com