PDA

View Full Version : Project 200SX SR20DET Stage II

David NA->FI
10-04-2004, 09:20 PM
Well, All prep work is done, sorted out most of the problems with the unnecessary wiring and also wired up some things. Waiting on new fuel pump, FMIC, custom piping from australia, and also some other goodies. The hard part has just begun. Here are few photos of my progress. THANK GOD I FINALLY GOT THE FREAKING ENGINE!
http://upload.houston-imports.com/uploaded/DSC00467 (Small).JPG
http://upload.houston-imports.com/uploaded/DSC00468 (Small).JPG
Matt_Mo_Money
10-04-2004, 09:23 PM
damn yall are on a roll fkn nice!!!! :thumb: :thumb: :thumb: :thumb:
David NA->FI
10-04-2004, 09:29 PM
damn yall are on a roll fkn nice!!!! :thumb: :thumb: :thumb: :thumb:

It's pretty much just me working on it, no one helps me out or anything. The only help was a tiny bit of chasis grinding and about a can of spray paint, been doing everything else alone. I can't take pictures very well, but the paint is almost completely dry, it's been sitting like that for 2 days, and the humidity was non existant when I sprayed it. I used rustoleum paint made for rust prevention and such, but I ground all the rust that I could, so hopefuly none will show up. It's pretty tough in person. I got the clutch pedal assembly today with a new master cylinder, tomorrow it's back to the auto parts store to get parts for making lines and such, and a trip to the dealership to pick up a few OEM parts as well. Hopefully I'll have the engine installed by the weekend.
MR2Fanatic
10-04-2004, 09:33 PM
DUUUUUUUDE!!!!!!!! I OFFERED TO HELP CAUSE YA, even though you were the one driving my mr2 when the hose from hell blew, you still helped me do a crap load when it came to fixing it. SO NO BITCHING...I OFFERED!!!! :thumb: :stfu: :roflmao:
NismoFreakS14
10-04-2004, 09:37 PM
Wanna buy an SR MAF, Intake Tube, and HKS Pod Filter for it?

$100

alan@splparts.com
David NA->FI
10-04-2004, 09:44 PM
Wanna buy an SR MAF, Intake Tube, and HKS Pod Filter for it?

$100

alan@splparts.com

got any pictures?
Fury
10-04-2004, 10:11 PM
Thanks for using my engine lift.




Dick.
slideways2004
10-04-2004, 10:22 PM
hey a redtop.........nice. that's what i have!
David NA->FI
10-04-2004, 11:38 PM
Thanks for using my engine lift.




Dick.

I doubt you really needed it that badly at the time. It'll be returned on the weekend, stop your bitching.
David NA->FI
10-05-2004, 01:15 AM
Also, FREE PARTS FROM THE CAR!!!! PLZ COME BY AND CHECK THEM OUT!!!!

CA20E will go to the junkyard on Friday if no claims it. No lie either I'm just going to dump it there and ask for a $5. Also all the AC parts will be given away for free as well. SOMEONE CAN MAKE SOME QUICK CASH!
lilspeedy
10-05-2004, 01:38 AM
can i get the ac parts
David NA->FI
10-05-2004, 01:45 AM
can i get the ac parts

Yep, come pick up what you need tomorrow. It held a charge, so no leaks anywhere.
omg hay guyZ!
10-05-2004, 02:16 AM
congrats dude. :thumb:
Fury
10-05-2004, 08:30 AM
I doubt you really needed it that badly at the time. It'll be returned on the weekend, stop your bitching.
You know im just messing with you, no need to unleash your pokemon after me.
turboteg
10-05-2004, 08:34 AM
smooth
MR2Fanatic
10-05-2004, 09:46 AM
yi-kes
vuu-SW21
10-05-2004, 10:49 AM
good job david. happy to see you got your swap going. anything I should be afraid when I see it on the road??
Boostylicious
10-05-2004, 12:30 PM
anything I should be afraid when I see it on the road??

nope
slideways2004
10-05-2004, 12:51 PM
man i wish i had the room for another engine. a couple of CA20's would pull a premium right before.......uuhhhhh..........Halloween! :roflmao:
MR2Fanatic
10-05-2004, 07:18 PM
Muahaha, david shall have to fear my MR2 ...once he installs my boost controller this weekend :roflmao: :roflmao: :thumb:
Agent S14
10-05-2004, 07:24 PM
You know im just messing with you, no need to unleash your pokemon after me.
:roflmao: :roflmao: :roflmao: :roflmao: pokemon scare me :(
David great job man :thumb:
lazymofo
10-05-2004, 10:38 PM
is that a S12 ur workin on?!?!!? if so thats fucken BADASS
John
10-05-2004, 10:42 PM
Wanna buy an SR MAF, Intake Tube, and HKS Pod Filter for it?

$100

alan@splparts.com

Oh, I didnt know you were the fabled Alan who went to work for Kuah. Tell him John from Houston said hi.
David NA->FI
10-06-2004, 12:31 AM
Yep, an old 1986 200SX aka... S12. I dropped the engine in today to measure everything up. I'm going to have to make some modifications to the mounts, but anyone with a drill and a vise can do it. I'm making the engine sit a little lower in the bay and also allowing the shifter to be positioned farther forward for better reach. But ya, I'm on a time crunch to get this finished. Wish me luck.